Premier guitar, Amp repair, Guitar Finishing center in North County San Diego

Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics
Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics
Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics
Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics
  • Load image into Gallery viewer, Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics
  • Load image into Gallery viewer, Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics
  • Load image into Gallery viewer, Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics
  • Load image into Gallery viewer, Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics

Analogman Beano Boost Treble Booster 2009 Grey/Red Graphics

Regular price
$215.00
Sale price
$215.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

This pedal is based on the 1960s British Dallas Rangemaster, which was best at the time to give a treble and gain boost to the dark British amps. This allowed them to get a sound more in tune with the time, as guitars were starting to become a loud, bold, lead instrument. This pedal is a type of BOOSTER, not really a distortion pedal nor a clean boost- it does modify your sound quite a bit. It excites certain frequencies and pushes your amp to allow it to create rich tube distortion. The pedal colors your tone, with a crunchy overdrive, boosting certain frequencies, and warming the tone with NOS germanium transistors. It does not have a lot of compression and sustain like most OD pedals, but a more raw, open sound.


This pedal has three tone settings from the tone switch- Center is a treble boost, the same as the original Dallas Rangemaster. UP is a fuller-frequency mid range boost (MID setting). Down is a LOW range, also quite a full frequency sound. Optionally we can install a push/pull switch (built into the volume knob) for 2 tone selections (treble and mids) but this option is not as good so we rarely build them.


The Beano Boost is spectacular into an amp that is already cranked up pretty well. It will also work well into a clean amp, but you probably need to turn the volume on the pedal up, to make the tone thicker by hitting the amp harder and making it work more.


At 9:00 the Beano Boost is unity gain and may not sound very special into a clean amp. At 12:00 it starts to boost the volume and get thicker. At 3:00 it should be waking your tubes up like a passing jet plane.


So if you use a clean amp, it's not something you can just turn on and get a great sound at the same volume. However most of the time when you want more crunch you want more volume, so it may work out fine. The clips on my site are into a clean fender amp


x